BASIC Stamp 2SX OEM Module Kit (Kit Form)

The OEM BASIC Stamp® 2SX module (kit form) is a through-hole version of the popular BASIC Stamp 2SX module. Once assembled, this product is NOT eligible for returning to Parallax.

The kit includes all the components needed to build a fully-functional BASIC Stamp 2sx microcontroller in a SIP format.  It can be programmed using the standard BASIC Stamp Editor just like the BS2sx-IC module.

Features:

• Assembled form factor is a 20-pin SIP (0.1" spacing).
• PC board includes labeled component locations with visible traces between parts.
• PBASIC interpreter and EEPROM chips are socketed to allow easy replacement.

Kit Contents:

• PC board
• PBASIC2sx Interpreter
• 16 Kbyte EEPROM
• 50 MHz resonator
• DB-9 serial connector
• 5-volt regulator, resistors, transistors, sockets and SIP pins

Free Downloads:
The BASIC Stamp Editor and BASIC Stamp Manual are available separately as free downloads.

Key Specifications:

• Power requirements: 5.0 to 7.5 VDC
• Communication: n/a
• Dimensions: 2.0L x 2.0W x 0.55H in (51L x 51W x 14H mm)
• Operating temp range: +32 to +158 °F (0 to +70 °C)

Note: Please note that low-power mode is only available when the regulator is removed and the BASIC Stamp 2sx OEM module is powered via the vdd pin.  The Parallax warranty is voided if the OEM kit is not assembled and soldered as per the printed instructions included in the kit. Contact Technical Support if you have any questions relating to the assembly of this product.

Once assembled, this product is NOT eligible for returning to Parallax.

Downloads & Resources:
BASIC Stamp 2sx OEM Manual (.pdf)
BASIC Stamp FAQ (.pdf)
BASIC Stamp 2sx OEM Schematic (.pdf)
BASIC Stamp 2sx OEM Gerber File Details (.zip)
BASIC Stamp 2sx revision notice (.pdf)